Description
An optical attenuator is a passive device that is used to reduce the power level of an optical signal. The attenuator circuit will allow a known source of power to be reduced by a predetermined factor, which is usually expressed as decibels. Optical attenuators are generally used in single-mode long-haul applications to prevent optical overload at the receiver.
Optical attenuators use several principles in order to accomplish the desired power reduction. Attenuators may use the gap-loss, absorptive, or reflective technique to achieve the desired signal loss. The types of attenuators generally used are fixed, stepwise variable, and continuously variable.
The principle of gap-loss is used in optical attenuators to reduce the optical power level by inserting the device in the fiber path using an inline configuration. Gap-loss attenuators are used to prevent the saturation of the receiver and are placed close to the transmitter.
Calculating the Attenuation Value
There are many types of attenuators and many principles on which they work. The key to choosing the appropriate one is to understand the theory on which each operates and the application that the attenuator will be applied to. Of course, you also need to be able to determine the attenuator value in decibels required for your application.
In this example let’s assume that the maximum optical input power a fiber-optic receiver can operate with is -6dBm. If the input power exceeds this power level, the receiver will be overloaded. The transmitter, which is located 10 km from the receiver, has an output power of 3dBm. The loss for 10 km of optical fiber, including interconnections, is 5dB.
To calculate the minimum attenuation required to prevent the receiver from being overloaded, we need to subtract all the known losses from the output power of the transmitter as shown here:
Transmitter power (TP) = 3dBm
Receiver maximum optical input power (MP) = -6dBm
Total losses (TL) = 5dB
Minimum attenuation required = MP + TL – TP = -6dBm + 5dB – 3dBm = – 4 dB
At a minimum, a 4 dB attenuator is required. However, an attenuator with a larger value could be used as long as it did not over attenuate the signal.
Fixed Attenuators
Fixed attenuators are designed to have a fixed attenuation level. They can theoretically be designed to provide any amount of attenuation that is desired. The output signal is attenuated relative to the input signal. Fixed attenuators are typically used for single-mode applications. Fig. 3 shows fixed optical attenuators.
Stepwise Variable Attenuators
A stepwise variable attenuator is a device that changes the attenuation of the signal in known steps such as 0,1 dB, 0,5 dB, or 1 dB. The stepwise attenuator may be used in several applications when dealing with multiple power sources
Continuously Variable Attenuators
A continuously variable attenuator is an attenuator that can be changed on demand. These attenuators generally have a device in place that allows the attenuation of the signal to change on demand. Continuously variable attenuator is used in uncontrolled environments.
Key Features
- Wide attenuation Range
- Environment stable
- Precision ceramic ferrule
- Simple and reliable structure
- For Any connector termination available
Provide Your Contact Details
Technical Specifications
Variable Attenuator/Inline Optical Attenuator | Parameter | Value |
Attenuator Range | 0~35 dB | |
Insertion Loss | 0.1 dB (Typical) | |
Return Loss | ≥50 dB (PC ) ≥50 dB (APC ) | |
Operation Temperature | -40 °C to +75 °C | |
Storage Temperature | -40 °C to +80 °C | |
Fixed Attenuator/Bulkhead Attenuator | Optical Parameter | ± 0.5 dB (1-5 dB) |
Alignment sleeve | Zirconia ceramic sleeve |
Ordering Information
Type | Attenuation Range (d.B) | Attenuation/Coupler Type 1 side. | Attenuation/Coupler Type 2 side. | Material Type |
Fixed Type Single Mode : 9/125um | 1dB - 25 dB | LC , SC, FC , ST,E2000, MPO,MTRJ | LC , SC, FC , ST,E2000, MPO,MTRJ | PVC, ABS, PC |
Multimode | 0 dB - 35 dB | LC , SC, FC , ST,E2000, MPO,MTRJ | LC , SC, FC , ST,E2000, MPO,MTRJ | PVC, ABS, PC |
